New in v2.4.29: 109+ one-click repairs including Check Disk Health! Download Now

Storage & DiskLow RiskFix All Compatible

Check Disk Health

Fix Disk Health performs a comprehensive health assessment and repair of all fixed drives. It checks SMART attributes for early warning signs of drive failure, scans for and repairs filesystem errors (equivalent to chkdsk /f), locates and remaps bad sectors, and optimizes drive performance. For HDDs it handles fragmentation; for SSDs it verifies TRIM is active. If critical SMART thresholds are exceeded, it warns you to backup immediately. This repair can prevent data loss by catching drive problems early. Takes 3-10 minutes for the scan, with filesystem repairs applied on next restart if needed.

📖

Main Troubleshooting Guide

How to Fix 100% Disk Usage →

Complete symptoms, causes, and step-by-step solutions

5 min

Estimated Time

low

Risk Level

No

Restart Needed

Yes

Fix All Safe

Fix This Automatically

RescuePC runs "Check Disk Health" with one click — no technical knowledge needed.

Download RescuePCFree Download

Common Symptoms

  • ⚠Disk usage stuck at 100% in Task Manager
  • ⚠Clicking or grinding noises from hard drive
  • ⚠Files taking abnormally long to open or save
  • ⚠SMART warnings in system BIOS
  • ⚠Blue screen with NTFS_FILE_SYSTEM or KERNEL_DATA_INPAGE_ERROR
  • ⚠Frequent "delayed write failed" errors

How to Fix

  1. 1

    Check SMART status: Open Admin CMD, run wmic diskdrive get status

  2. 2

    Run disk check: chkdsk C: /f /r (schedule on restart)

  3. 3

    Check disk fragmentation: Defragment and Optimize Drives (dfrgui)

  4. 4

    Monitor disk health: Task Manager > Performance > Disk tab

  5. 5

    If HDD: defragment regularly. If SSD: ensure TRIM is enabled

  6. 6

    Backup immediately if SMART reports errors or bad sectors found

  7. 7

    Or run RescuePC's Fix Disk Health which checks all drives and repairs filesystem errors automatically

Frequently Asked Questions

What does "Check Disk Health" do?▼
Checks SMART status and runs CHKDSK in scan mode. It is a one-click repair in the Storage & Disk category that automates the fix so you don't need technical expertise.
Is "Check Disk Health" safe to run?▼
Yes — this is a low-risk repair. It makes non-destructive changes and does not require a restore point.
How long does "Check Disk Health" take?▼
Typically about 5 minutes. No restart is needed.
Can I run "Check Disk Health" automatically with Fix All?▼
Yes — this repair is included in the Fix All chain, which runs multiple safe repairs back-to-back with no interaction needed.
Do I need administrator access to run "Check Disk Health"?▼
Yes — this repair requires administrator privileges because it modifies system-level settings. RescuePC will prompt for elevation via UAC.

Related Repairs

Optimize SSD

Enables TRIM and optimizes SSD settings

Storage2 min

Related Troubleshooting Guides

Having this issue? These in-depth guides walk you through the full troubleshooting process:

How to Fix Blue Screen of Death (BSOD)

Symptoms, causes, and step-by-step solutions →

How to Fix Computer Freezing and Hanging

Symptoms, causes, and step-by-step solutions →

How to Fix 100% Disk Usage

Symptoms, causes, and step-by-step solutions →

How to Fix CRITICAL_PROCESS_DIED Blue Screen

Symptoms, causes, and step-by-step solutions →

Ready to Fix Your PC?

RescuePC Toolkit includes 109+ one-click repairs for Windows 10 & 11. Download now and fix "Check Disk Health" in under 5 minutes.

Free Download